View HMC717ALP3E_8974817.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

amplifier - low noise - smt 1 HMC717ALP3E v09.0816 ga a s p hemt mmic low noi s e a m p l ifier, 4.8 - 6.0 ghz general description features functional diagram the HMC717ALP3E is a gaas phemt mmic low noise amplifer that is ideal for fxed wireless and lte/wimax/4g basestation front-end receivers operating between 4.8 and 6.0 ghz. the amplifer has been optimized to provide 1.1 db noise fgure, 14.5 db gain and +29.5 dbm output ip3 from a single supply of +5v. input and output return losses are excellent and the lna requires minimal external matching and bias decoupling components. the HMC717ALP3E can be biased with +3v to +5v and features an externally adjustable supply current which allows the designer to tailor the linearity performance of the lna for each application. noise figure: 1.1 db gain: 14.5 db output ip3: +29.5 dbm single supply: +3v to +5v 16 lead 3x3mm qfn package: 9 mm 2 typical a ppl ications the HMC717ALP3E is ideal for: ? fixed wireless and lte/wimax/4g ? bts & infrastructure ? repeaters and femtocells ? public safety radio ? access points electrical s p ecifcations t a = +25 c, rbias = 825 ohms for vdd = 5v, rbias = 5.76k ohms for vdd = 3v [1] [2] parameter vdd = +3v vdd = +5v units min. typ. max. min. typ. max. frequency range 4.8 - 6.0 4.8 - 6.0 ghz gain 12.5 11.0 14.5 db gain variation over temperature 0.005 0.01 db/ c noise figure 1.3 1.3 1.8 db input return loss 8 9 db output return loss 13 15 db output power for 1 db compression (p1db) 12 18 dbm saturated output power (psat) 14.5 19 dbm output third order intercept (ip3) 23.5 29.5 dbm total supply current (idd) 31 68 100 ma [1] rbias resistor sets current, see application circuit herein [2] vdd = vdd1 = vdd2 . for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifcations subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners.
amplifier - low noise - smt 2 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz input return loss vs. temperature [1] output return loss vs. temperature [1] broadband gain & return loss [1][2] -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 12345678910 vdd=5v vdd=3v frequency (ghz) response (db) s11 s21 s22 -20 -15 -10 -5 0 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) return loss (db) -25 -20 -15 -10 -5 0 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) return loss (db) [1] vdd = 5v, rbias = 825 [2] vdd = 3v, rbias = 5.76k gain vs. temperature [2] 0 2 4 6 8 10 12 14 16 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) gain (db) gain vs. temperature [1] 1 3 5 7 9 11 13 15 17 19 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) gain (db) reverse isolation vs. temperature [1] -50 -45 -40 -35 -30 -25 -20 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) isolation (db) for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 3 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz p 1db vs. temperature [1] [2] p sat vs. temperature [1] [2] 8 10 12 14 16 18 20 22 24 4.5 4.8 5.1 5.4 5.7 6 +25c +85c -40c frequency (ghz) psat (dbm) vdd=5v vdd=3v 8 10 12 14 16 18 20 22 24 4.5 4.8 5.1 5.4 5.7 6 +25c +85c -40c frequency (ghz) p1db (dbm) vdd=5v vdd=3v output i p 3 and total s upply current vs. s upply voltage @ 4800 mhz [3] [1] vdd = 5v, rbias = 825 [2] vdd = 3v, rbias = 5.76k [3] rbias = 825 for vdd = 5v, rbias = 5.76k for vdd = 3v output ip 3 vs. temperature [1] [2] 16 19 22 25 28 31 34 37 40 4.5 4.8 5.1 5.4 5.7 6 +25c +85c -40c frequency (ghz) ip3 (dbm) vdd=5v vdd=3v 14 16 18 20 22 24 26 28 30 32 34 20 30 40 50 60 70 80 90 100 110 120 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 ip3-3v ip3-5v idd-3v idd-5v ip3 (dbm) idd (ma) voltage supply (v) noise figure vs. temperature [1] [2] 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 vdd=5v vdd=3v frequency (ghz) noise figure (db) +85c +25c -40c output i p 3 and total s upply current vs. s upply voltage @ 5900 mhz [3] 20 22 24 26 28 30 32 34 20 35 50 65 80 95 110 125 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 ip3-3v ip3-5v idd-3v idd-5v ip3 (dbm) idd (ma) voltage supply (v) for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 4 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz p ower compression @ 5900 mhz [1] -10 -5 0 5 10 15 20 25 -20 -16 -12 -8 -4 0 4 8 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) -10 -5 0 5 10 15 20 25 -20 -16 -12 -8 -4 0 4 8 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) p ower compression @ 5900 mhz [2] p ower compression @ 4800 mhz [1] -10 -5 0 5 10 15 20 25 -20 -16 -12 -8 -4 0 4 8 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) -10 -5 0 5 10 15 20 25 -20 -16 -12 -8 -4 0 4 8 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) p ower compression @ 4800 mhz [2] [1] vdd = 5v, rbias = 825 [2] vdd = 3v, rbias = 5.76k [3] rbias = 825 for vdd = 5v, rbias = 5.76k for vdd = 3v gain, p ower & noise figure vs. s upply voltage @ 4800 mhz [3] 8 10 12 14 16 18 20 22 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 2.7 3 3.3 3.6 3.9 4.2 4.5 4.8 5.1 5.4 p1db gain nf gain (db) & p1db (dbm) noise figure (db) voltage supply (v) gain, p ower & noise figure vs. s upply voltage @ 5900 mhz [3] 8 10 12 14 16 18 20 22 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2.7 3 3.3 3.6 3.9 4.2 4.5 4.8 5.1 5.4 p1db gain nf gain (db) & p1db (dbm) noise figure (db) voltage supply (v) for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 5 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz output ip 3 vs. rbias @ 5900 mhz 17 20 23 26 29 32 35 100 1000 10000 vdd=3v vdd=5v rbias (ohms) ip3 (dbm) gain, noise figure & rbias @ 5900 mhz output ip 3 vs. rbias @ 4800 mhz 18 20 22 24 26 28 30 32 34 100 1000 10000 vdd=3v vdd=5v rbias (ohms) ip3 (dbm) gain, noise figure & rbias @ 4800 mhz 10 12 14 16 18 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 100 1000 10000 vdd=3v vdd=5v gain (db) noise figure (db) rbias (ohms) 2 5 8 11 14 17 20 1 1.2 1.4 1.6 1.8 2 2.2 100 1000 10000 vdd=3v vdd=5v gain (db) noise figure (db) rbias (ohms) for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 6 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz a bsolute maximum ratings drain bias voltage (vdd) +5.5v rf input power (rfin) (vdd = +5 vdc) +20 dbm channel temperature 150 c continuous pdiss (t= 85 c) (derate 8.0 mw/c above 85 c) 0.52 w thermal resistance (channel to ground paddle) 125 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a electrostatic sensitive device observe handling precautions rbias vdd (v) idd (ma) 5.76k 2.7 20 3.0 31 3.3 39 825 4.5 57 5.0 72 5.5 86 note: amplifer will operate over full voltage ranges shown above. typical s upply current vs. s upply voltage vdd (v) rbias (ohms) idd (ma) min max recommended 3v 1.69k [1] open circuit 1.69k 20 2.94k 26 5.76k 30 5v 40 [2] open circuit 40.2 48.4 562 65.5 825 72 [1] with vdd= 3v and rbias < 1.69k may result in the part becoming conditionally stable which is not recommended. [2] with vdd = 5v and rbias<40 may result in the part becoming conditionally stable which is not recommended. a bsolute bias resistor range & recommended bias resistor values for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 7 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz outline drawing part number package body material lead finish msl rating package marking [3] HMC717ALP3E rohs-compliant low stress injection molded plastic 100% matte sn msl3 [2] 717a xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. p ackage information for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 8 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz pin number function description interface schematic 1, 3 - 7, 9, 10, 12, 14, 16 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. 2 rfin this pin is dc coupled see the application circuit for off-chip component. 8 bias this pin is used to set the dc current of the amplifer by selection of the external bias resistor. see application circuit. 11 rfout this pin is ac coupled and matched to 50 ohms 13, 15 vdd2, vdd1 power supply voltage. bypass capacitors are required. see application circuit. gnd package bottom must be connected to rf/dc ground p in descriptions for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 9 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz theory of o p er a tion the hmc717a is a gallium arsenide (gaas), monolithic microwave integrated circuit (mmic), pseudomorphic (phemt), low noise amplifer. the hmc717a amplifer uses two gain stages in series, the basic schematic for the amplifer is shown in figure 3, which forms a low noise amplifer operating from 4.8 ghz to 6 ghz with excellent noise fgure performance. basic schematic for hmc717a the hmc717a has single-ended input and output ports whose impedances are nominally equal to 50 over the 4.8 ghz to 6 ghz frequency range. consequently, it can directly insert into a 50 system with no required impedance matching circuitry, which also means that multiple hmc717a amplifers can be cascaded back to back without the need for external matching circuitry. the input and output impedances are sufficiently stable vs. variations in temperature and supply voltage that no impedance matching compensation is required. note that it is critical to supply very low inductance ground connections to the backside exposed paddle to ensure stable operation. to achieve optimal performance from the hmc717a and prevent damage to the device, the absolute maximum ratings should not be exceeded. app lic a tion s inform a tion the fgure above shows the basic connections for operating the hmc717a. ac couple the input with 1.2 pf capacitor. the rf output of the hmc717a has on chip dc block capacitor which eliminates the need for external ac coupling capacitor. use the appropriate rbias resistor values, given in the absolute bias resistor range & recommended bias resistor values table on page 6 . the bias conditions previously listed (vdd = 5 v, rbias = 825 and vdd = 3 v, rbias = 5.76k) are the recommended operating points to achieve optimum performance. the data used in this data sheet was taken with the recommended bias conditions. when using the hmc717a with different bias conditions, different performance than what is shown in the typical perfor - mance characteristics section may result. increasing the vdd level and changing the rbias resistor to the recommended value, typically improves gain, ip3 and noise fgure at the expense of power consumption. this behavior can be seen on typical performance characteristics plots. for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 10 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz a pplication circuit hmc717alp3fe evaluation board schematic for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d
amplifier - low noise - smt 11 HMC717ALP3E v09.0816 ga a s phemt mmic low noi s e a m p lifier, 4.8 - 6.0 ghz evaluation p cb item description j1, j2 pcb mount sma rf connectors, johnson 142-0701- 851 j3 - j5 pcb mount sma rf connectors, johnson 142-0701- 851 c1 capacitor, ceramic, 10 nf, 16 v, x7r, 0402 package. c2, c4 capacitor, ceramic, 1 nf, 50 v, x7r, 0603 package. c3, c5 capacitor, ceramic, 0.1 f, 50 v, x7r, 0603 package. c6 capacitor, ceramic, 1.2 pf,25 v, c0g, high q, 0402 package. r1 resistor, 825 ohm 1%, 0402 pkg. (rbias) r2, r3 0 ohm resistor, 0402 pkg. u1 HMC717ALP3E amplifer pcb 120586 evaluation pcb; circuit board material: rogers 4350 [1] reference this number when ordering complete evaluation pcb list of materials for evaluation p cb ev1hmc717 a l p 3 [1] the HMC717ALP3E evaluation board is a four-layer board fabricated using rogers 4350 and using best practices for high frequency rf design. the rf input and rf output traces have a 50 ? character - istic impedance. the HMC717ALP3E evaluation board and popu - lated components are designed to operate over the ambient temperature range of ?40c to +85c. for proper bias sequence, please see the applications information section of the datasheet. the HMC717ALP3E evaluation board schematic ( hmc717alp3fe evaluation board schematic ) is shown on page 10. a fully populated and tested evalua - tion board, shown above, is available from analog devices, inc., upon request. evaluation printed circuit board (pcb) for price, delivery, and to place orders: analog devices, inc., one technology way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 ? order online at www.analog.com application support: phone: 1-800-analog-d

▲Up To Search▲

Price & Availability of HMC717ALP3E

	To Download HMC717ALP3E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .